9 Best Auto-Feed Paper Shredders (November 2026)
The best best auto feed paper shredders include the BONSEN P-5 High Security 320-Sheet Micro Cut (best overall), the Bonsaii 120-Sheet Auto-Feed Micro-Cut Shredder for small offices, and the Bonsaii 200-Sheet Auto-Feed Micro-Cut Shredder for all-day office use.
On this page (9 sections)
- Which auto feed paper shredder suits your office?
- How the best auto feed paper shredders compare
- How these auto feed shredders were compared
- What does the security level actually mean?
- How big a batch do you need to shred?
- Why does run time matter more than speed?
- Manual slot or auto tray: which do you need?
- Which auto feed shredder fits a small space?
- Verdict: the best auto feed paper shredder for hands-off shredding
The best auto feed paper shredder for most people is the BONSEN P-5 High Security 320-Sheet Micro Cut. Its auto tray takes the largest stack here, and the P-5 micro-cut gives you top-tier protection in the same pass.
If your priority is big batches at a lower price, the Amazon Basics 200-Sheet is a solid cross-cut choice. Look at the Fellowes AutoMax 100MA when desk space is tight.
Auto-feed shredding changes the job from a chore into a background task. You load the tray, walk away, and the machine works through the stack while you do something else.
The manual slot still matters, because cards, staples and clips rarely belong in an auto tray.
Our guide to buying a paper shredder covers manual models if you only shred a few sheets a week. For the right size in a home workspace, our paper shredder for home office guide explains what fits where.
Our picks at a glance
-
1
-
2
Best for small officesBonsaii 120-Sheet Auto-Feed Micro-Cut Shredder
8.6/10 our score
See it on Amazon -
3
Best for all-day office useBonsaii 200-Sheet Auto-Feed Micro-Cut Shredder
8.2/10 our score
See it on Amazon
- 4
Check itAmazon Basics 200-Sheet Auto-Feed Cross-Cut Shredder
Best for mixed office paper - 5
Check itFellowes AutoMax 100MA 100-Sheet Auto-Feed Shredder
Best compact unit - 6
Check itAurora AU110MB 110-Sheet Auto-Feed Shredder
Best for home office desks - 7
Check itBonsen 300-Sheet Auto-Feed Micro-Cut Shredder
Best for high-volume batches - 8
Check itAmazon Basics 8-Sheet P-4 Cross-Cut Shredder
Best for light home use - 9
Check itAurora 200-Sheet P-5 Auto-Feed Micro-Cut Shredder
Best for confidential records
Which auto feed paper shredder suits your office?
The top pick wins on security and capacity, while the other models here serve smaller desks, budget setups and specific paper types. Each one earns its place on a different need.
The sections below walk through who each unit suits, what its numbers mean day to day, and where it gives ground to the others.
BONSEN P-5 High Security 320-Sheet Micro Cut: Best overall
- 320-sheet auto-feed tray
- P-5 micro-cut, 2 x 10 mm
- 60-minute continuous run in auto mode
- 8.1-gallon bin with casters
The biggest auto-feed tray here, paired with the highest security cut. It handles a full stack of documents in one pass and keeps running for an hour.
Pros
- Largest auto-feed tray in this group
- P-5 micro-cut for sensitive documents
- 60-minute auto run time
- 8.1-gallon bin and casters
Cons
- Heaviest pick here at 38.4 pounds
- Premium security costs more than the budget picks
The BONSEN P-5 suits anyone who shreds sensitive documents in bulk, such as contracts, client files or payroll records. It turns a letter page into 3,013 particles at 2 x 10 mm, so reconstruction is genuinely difficult.
That particle count is the highest in this group.
The 320-sheet auto tray is the largest here. Load a full stack, press auto, and let it run for up to 60 minutes.
BONSEN rates the motor at roughly 3,600 sheets in that hour.
Manual mode adds 10 sheets plus staples, clips and credit cards.
The 8.1-gallon bin reduces emptying trips, and the casters make a 38.4-pound machine easier to move than its weight suggests. BONSEN also fits an auto-reverse function to clear jams and a sleep mode after 10 minutes idle.
It runs at 58 dB, quiet enough to sit near a desk. The trade-off is size and price against the smaller units, and at 38.4 pounds it's the heaviest pick here.
Choose it if security level and batch size both matter. Skip it if you shred a few pages a week.
Bonsaii 120-Sheet Auto-Feed Micro-Cut Shredder: Best for small offices
- 120-sheet auto-feed tray
- P-4 micro-cut, 4 x 12 mm
- 30-minute auto run time
- 5.9-gallon pullout bin with casters
A lighter frame and a 5.9-gallon bin suit a small office that empties the shredder often. Auto mode takes paper only, while the manual slot also handles staples and cards.
Pros
- Lighter than the larger picks
- Casters for moving between desks
- Auto mode takes stapled-free paper stacks
- Manual slot handles credit cards and staples
Cons
- Auto mode is for paper only
- Shorter 30-minute auto run time
The Bonsaii 120-Sheet fits a small office that values mobility. Its 5.9-gallon pullout bin and casters make a lighter package than the big BONSEN units, so it rolls around without feeling like a filing cabinet.
A metal and plastic frame keeps the body at roughly 19.7 pounds.
Auto mode takes up to 120 sheets of plain paper only. The manual slot handles 12 sheets plus mail, cards and staples, giving you a second route for odd items.
The bin's transparent window lets you see when it's time to empty.
A 71-inch per minute speed and a 30-minute auto run time cover a normal working morning. The micro-cut produces 4 x 12 mm pieces at P-4, enough for most business paperwork.
The manual side runs 10 minutes before a cool down.
The bin stops shredding when it's about 80% full, which saves you from overflow. Bonsaii puts noise at 63 dB, a touch louder than the 58 dB units, and the paging wheel reverses briefly during shredding to cut down jams.
It's the best small-office middle pick here: more capacity than the compact models, less bulk than the 300-sheet units. It also asks you to keep cards out of the auto tray and in the manual slot.
Bonsaii 200-Sheet Auto-Feed Micro-Cut Shredder: Best for all-day office use
- 200-sheet auto-feed tray
- P-4 micro-cut, 4 x 12 mm
- 60-minute continuous auto run
- 8.1-gallon bin and 12 lubricant sheets included
A 200-sheet tray and a full hour of auto run time fit a busy office. The 8.1-gallon bin holds roughly 700 sheets before you need to empty it.
Pros
- 60-minute auto run time
- Large 8.1-gallon bin
- Lubricant sheets included
- Runs at 58 dB
Cons
- P-4, not the P-5 cut of the top pick
- Auto mode accepts letter-size paper only
The Bonsaii 200-Sheet is the pick for a busy shared office. A 60-minute continuous auto run matches a full working hour, and the 200-sheet tray means you reload less often.
The manual feed runs 30 minutes of continuous shredding.
The 8.1-gallon bin holds roughly 700 sheets before emptying, so a daily user isn't stopping to change bags. It runs at 58 dB and drops into a sleep mode after 10 minutes idle.
That quiet rating matters if the machine sits in an open-plan room.
Manual mode takes 12 sheets plus cards, staples and clips, so confidential cards don't need a separate machine. Bonsaii includes 12 lubricant sheets for maintenance.
The bin pulls out, so emptying doesn't mean lifting the whole body.
The P-4 micro-cut at 4 x 12 mm keeps documents secure without the P-5 price. Auto mode is limited to letter-size paper at 8.5 x 11 inches and 20-pound weight, which covers most office printing.
At 33.9 pounds it's lighter than the BONSEN machines.
Choose it if you shred nearly every day. The top pick still wins if P-5 security is a hard requirement.
Amazon Basics 200-Sheet Auto-Feed Cross-Cut Shredder: Best for mixed office paper
- 200-sheet auto-feed tray
- P-4 cross-cut, 4 x 20 mm
- 60-minute auto run time
- 8.5-gallon pullout bin
Tied for the biggest bin here, with a 60-minute auto run time and a cross-cut that handles staples. A straightforward choice for everyday office paper.
Pros
- Tied for the largest bin in this group at 8.5 gallons
- 60-minute auto run time
- Handles staples without removing them
- Simple 4-mode control switch
Cons
- Cross-cut pieces are larger than micro-cut
- Manual feed runs only 10 minutes before cooling
The Amazon Basics 200-Sheet suits an office with mixed paper, including stapled packets. You don't have to pull staples before loading the tray, a small time saver that adds up over a week.
It's the model to pick when your stacks are full of fastened reports.
The 8.5-gallon bin ties for the biggest here, and the 60-minute auto run time means fewer interruptions in a busy office. Its P-4 cross-cut produces 4 x 20 mm pieces, larger than micro-cut but still high security.
Standard cross-cut size keeps the machine moving at a steady pace.
The four-mode switch covers auto, off, forward and reverse, and the anti-jam auto reverse clears misfeeds. LED indicators show feed errors, bin full, door open, overload and overheat, so troubleshooting is quick.
Manual mode runs 10 minutes before a 45-minute cool down, so odd jobs are best kept short. It weighs 32.9 pounds and measures about 18 x 14 x 23 inches, so it wants a spot of its own.
Pick it for straightforward bulk shredding of standard office paper. Look to the BONSEN units if you need a finer cut for sensitive records.
Fellowes AutoMax 100MA 100-Sheet Auto-Feed Shredder: Best compact unit
- 100-sheet auto-feed tray
- P-4 micro-cut
- Auto and manual feed together
- 4.5-gallon pull-out bin
A small footprint for a desk corner, with a retractable tray and a 100-sheet batch in about 5 minutes. It shreds auto and manual feeds at the same time.
Pros
- Compact design with retractable tray
- Shreds up to 100 sheets in about 5 minutes in auto mode
- Runs auto and manual feeds together
- Manual slot handles cards, clips and staples
Cons
- Smaller 4.5-gallon bin
- 10-minute auto run time
The Fellowes AutoMax 100MA is the best fit for a desk corner. The retractable tray tucks away when not in use, and the compact body keeps the footprint small without giving up auto feed.
At 8.8 kg it's light enough to shift when you rearrange the room.
It shreds up to 100 sheets in about 5 minutes in auto mode, fast enough to clear a daily pile quickly. You can also run the auto tray and manual slot at the same time, useful when cards and paper need shredding together.
That 2-in-1 ability is rare among the compact models.
The P-4 micro-cut is secure enough for most office documents. Manual mode adds credit cards, paper clips and staples.
A bin full sensor tells you when the 4.5-gallon pull-out bin needs emptying.
Fellowes rates it at 75 dB, louder than the 58 dB Bonsaii units, and the smaller bin fills sooner. It runs 10 minutes in auto mode and 7 minutes in manual before a cool down.
A metal enclosure gives it a sturdier feel than the plastic-heavy options.
Choose it where space matters more than capacity. Skip it for a high-volume mailroom, where the tray and run time will feel small.
Aurora AU110MB 110-Sheet Auto-Feed Shredder: Best for home office desks
- 110-sheet auto-feed tray
- P-4 micro-cut, 4 x 14 mm
- 30-minute continuous run time
- 4-gallon pullout bin with casters
A light 17.4-pound body that sits comfortably beside a home desk. The 30-minute run time handles a typical week of mail and statements.
Pros
- Lightest micro-cut pick here at 17.4 pounds
- 30-minute nonstop run time
- Shreds credit cards in manual mode
- Casters included
Cons
- 4-gallon bin fills faster
- Smaller auto-feed tray than the Bonsaii models
The Aurora AU110MB suits a home office desk where the shredder sits in view. At 17.4 pounds it's the lightest micro-cut model here, and the 30-minute nonstop run covers a typical week of statements and mail.
Its white and black finish blends into a home setup better than the black boxes.
The 110-sheet auto tray handles a moderate stack, while manual mode takes 10 sheets plus credit cards. Micro-cut pieces at 4 x 14 mm meet P-4 security.
The compact 8.7 x 13.4 x 18.8 inch frame fits under or beside a desk.
The 4-gallon pullout bin keeps emptying simple, and the LED indicators cover feed errors, bin full, door open, overload and overheat. Casters are included if you need to move it.
The bin fills faster than the 8-gallon models, so empty it before it packs tight.
Aurora builds in auto start and stop, jam prevention auto reverse and overload protection. Noise stays low enough for a shared room.
It's the pick for light, steady home use. Heavy offices should look at the 200-sheet models instead, which offer longer runs and bigger trays.
Bonsen 300-Sheet Auto-Feed Micro-Cut Shredder: Best for high-volume batches
- 300-sheet auto-feed tray
- P-4 micro-cut, 4 x 12 mm
- 60-minute auto run time
- 8.1-gallon bin with casters
A 300-sheet tray for clearing a filing cabinet in one sitting. The P-4 micro-cut keeps the pieces small while the bin holds the whole batch.
Pros
- 300-sheet auto-feed tray
- 60-minute auto run time
- 8.1-gallon bin with casters
- LED indicators for feed errors and bin full
Cons
- P-4 security, not P-5
- The top pick shreds more sheets at a higher security level
The Bonsen 300-Sheet suits the buyer who clears entire drawers at once. The 300-sheet tray is second only to the top pick here, and a 60-minute auto run lets you work through a full cabinet without reloading.
At 33.5 pounds it's lighter than its P-5 sibling.
P-4 micro-cut at 4 x 12 mm keeps documents private, and the manual slot takes 12 sheets plus cards, staples and clips. The manual side runs 30 minutes, so cards and odd items don't stall the workflow.
The 8.1-gallon bin and casters match the larger BONSEN layout.
For daily use it's a strong pick. The trade-off against the top pick is security level: this one stays at P-4 rather than P-5, and the top model shreds 20 more sheets per load.
Its auto mode takes paper only, so fasteners belong in the manual slot.
LED indicators flag feed errors, bin full, door open, overload and overheat. It runs at 58 dB and sleeps after 10 minutes.
Choose it for big batches where P-4 is enough. Pick the P-5 BONSEN if the documents are truly sensitive.
Amazon Basics 8-Sheet P-4 Cross-Cut Shredder: Best for light home use
- 8-sheet manual feed
- P-4 cross-cut, 5 x 18 mm
- 3-minute run time
- 3.7-gallon bin
A manual-only desk shredder for small daily piles rather than big batches. It's the budget way to add P-4 shredding to a home office.
Pros
- P-4 security at the budget end
- Light 8.7-pound body
- Shreds staples, clips and non-metal cards
- Auto shut-off protects the motor
Cons
- No auto-feed tray
- 3-minute run time before cooling
The Amazon Basics 8-Sheet is the budget route into P-4 security. It's manual only, so there's no auto tray, but it handles 8 sheets at a time and meets the same P-4 standard as the larger models.
Its cut size of 5 x 18 mm sits between cross-cut and micro-cut.
At 8.7 pounds it fits on a desk without effort. It shreds staples, small paper clips and non-metal credit cards, so small daily piles don't need a separate trip to a bigger machine.
The 3.7-gallon bin takes a few days of home paperwork before it needs emptying.
Run time is 3 minutes with a 30-minute cool down, and overheat protection shuts the motor off automatically if you push past it. The four-mode switch covers auto, off, forward and reverse.
At 12.8 x 7.3 x 14.1 inches it's the smallest unit here.
It's the pick for someone who shreds a few documents a day and wants the security without the footprint or price of an auto-feed unit. For real batches, move up to one of the auto models.
Aurora 200-Sheet P-5 Auto-Feed Micro-Cut Shredder: Best for confidential records
- 200-sheet auto-feed tray
- P-5 micro-cut, 2 x 12 mm
- 60-minute continuous run time
- 8.5-gallon pullout bin
P-5 micro-cut that turns one letter page into about 2,592 particles. A fit for legal, financial or medical paperwork that needs the highest protection level.
Pros
- P-5 high security micro-cut
- 60-minute continuous run time
- Large 8.5-gallon pullout bin
- Auto power-sleep for energy saving
Cons
- Heavy 38.1-pound body
- Higher security cut slows the machine slightly
The Aurora 200-Sheet is the other P-5 pick, and it suits legal, financial or medical paperwork. The 2 x 12 mm micro-cut turns a letter page into about 2,592 particles, ten times smaller than standard cross-cut.
That's the piece count to quote when someone asks what P-5 buys you.
A 60-minute continuous run covers long shredding sessions, and the 8.5-gallon pullout bin matches the biggest capacity here. Auto mode takes 200 sheets, manual mode takes 10.
Auto power-sleep saves energy when the machine is idle.
Anti-jam auto reverse clears misfeeds, and LED lights show standby, overheat, bin-full, overload and door-open status. The white body and 120-volt corded power suit a fixed office spot.
At 38.1 pounds it's a heavy machine that wants a permanent place. BONSEN's top pick edges it on tray size and particle count, which is why it sits lower here.
Choose it when P-5 security and a big bin matter most. If tray size is the priority, the BONSEN leads.
How the best auto feed paper shredders compare
The table lines up the specs that matter most: auto-feed capacity, security level and bin size. Use it to see at a glance which model matches your batch size.
The biggest trays pair with the biggest bins, and the P-5 units sit at the top for protection.
| Product | Best for | Auto-feed capacity | Security level | Bin capacity | Our score |
|---|---|---|---|---|---|
| BONSEN P-5 High Security 320-Sheet Micro Cut | overall | 320 sheets | P-5 | 8.1 gallons | 9.2 |
| Bonsaii 120-Sheet Auto-Feed Micro-Cut Shredder | small offices | 120 sheets | P-4 | 5.9 gallons | 8.6 |
| Bonsaii 200-Sheet Auto-Feed Micro-Cut Shredder | all-day office use | 200 sheets | P-4 | 8.1 gallons | 8.2 |
| Amazon Basics 200-Sheet Auto-Feed Cross-Cut Shredder | mixed office paper | 200 sheets | P-4 | 8.5 gallons | 7.8 |
| Fellowes AutoMax 100MA 100-Sheet Auto-Feed Shredder | compact unit | 100 sheets | P-4 | 4.5 gallons | 7.8 |
| Aurora AU110MB 110-Sheet Auto-Feed Shredder | home office desks | 110 sheets | P-4 | 4 gallons | 7.7 |
| Bonsen 300-Sheet Auto-Feed Micro-Cut Shredder | high-volume batches | 300 sheets | P-4 | 8.1 gallons | 7.2 |
| Amazon Basics 8-Sheet P-4 Cross-Cut Shredder | light home use | P-4 | 3.7 gallons | 7.1 | |
| Aurora 200-Sheet P-5 Auto-Feed Micro-Cut Shredder | confidential records | 200 sheets | P-5 | 8.5 gallons | 7.0 |
How these auto feed shredders were compared
We compared each model on auto-feed capacity, security level, run time and bin size, since those four decide how much work a shredder does before you step in. Cut type sorted the P-5 units from the P-4 group.
A 2 x 10 mm cut and a 4 x 20 mm cut both meet their security level, but they behave very differently in daily use.
We also weighed the manual slot, because cards, staples and clips rarely fit the auto tray. Noise ratings, weight and casters counted for machines that move between desks.
A 58 dB unit and a 75 dB unit sit in different rooms in practice.
Our score weighs specs and features against what you're shopping for in an auto feed shredder. A compact model isn't marked down for having a small bin if that's what its buyer wants.
What counts against a unit is a spec that undercuts its own promise, such as a big tray paired with a short run time.
What does the security level actually mean?
The P-level tells you how small the shredder cuts paper, and P-5 is the higher protection level in this group. A P-5 micro-cut turns one letter page into more than 3,000 pieces on the top pick, while the P-4 models here cut into fewer, larger pieces.
The number of particles is the clearest way to compare two machines.
For everyday receipts and junk mail, P-4 is fine. For anything with an account number, a signature or a medical detail, step up to P-5.
The piece size is what makes reconstruction hard, not the speed of the machine.
The practical difference is time. P-5 cutters work more slowly per sheet, so a P-5 unit with a smaller tray takes longer to clear a stack than a P-4 model with the same capacity.
That's the real cost of the extra security.
When is P-4 enough?
P-4 suits general office paperwork, internal memos and routine bills. Most of the picks here use it, and they're the faster, cheaper group.
A 4 x 12 mm micro-cut or a 4 x 20 mm cross-cut both clear the bar for ordinary business documents.
When should you choose P-5?
P-5 suits legal, financial, medical and HR records. The BONSEN top pick and the Aurora 200-Sheet are the two P-5 models in this roundup.
If your files carry client names, account numbers or health details, the smaller cut is worth the slower pace.
How big a batch do you need to shred?
Batch size decides the tray, and an auto-feed tray that takes 100 sheets clears about a week of home mail in one go. Buyers who shred daily should look at 200 sheets or more.
The tray is the number to match to your paper habit.
The 300-sheet and 320-sheet trays are for clearing filing cabinets, not daily mail. If you load a full tray once a month, the bigger units earn their space.
If you feed a few sheets a day, the manual slot does the job.
The other side of batch size is the bin. A large tray fills a small bin quickly, which is why the big models here pair with 8-gallon bins.
A 300-sheet tray on a 4-gallon bin would mean constant emptying, so the two specs belong together.
Trays for home offices
Pick 100 to 120 sheets for a home desk. The Fellowes AutoMax 100MA and Aurora AU110MB fit that range.
Their smaller bins are easy to tuck away, and the shorter runs suit a weekly session rather than a daily one.
Trays for shared offices
Pick 200 sheets or more for a team. The Bonsaii 200-Sheet, Amazon Basics 200-Sheet and both BONSEN models cover that.
Pair them with an 8-gallon bin and a 60-minute run so one person's batch doesn't block the next.
Why does run time matter more than speed?
Run time decides how long the machine keeps going before a cool down, and a 60-minute run clears a full tray without a break. Speed matters less because the tray feeds itself.
A fast machine that stops after 10 minutes still leaves a stack half done.
The BONSEN top pick, Bonsen 300-Sheet, Bonsaii 200-Sheet, Amazon Basics 200-Sheet and Aurora 200-Sheet all run 60 minutes in auto mode. The smaller models stop at 10 to 30 minutes.
The Bonsaii 120-Sheet sits in the middle at 30 minutes.
For a home office, 30 minutes is enough. A busy office will notice the difference when a cool-down interrupts a long batch.
Cool-down times on the units that state them run from 30 to 45 minutes, so a stop costs you real time.
When a shorter run is fine
A 10 to 30-minute run suits light weekly shredding and a compact desk setup. The Fellowes and Aurora AU110MB sit in that group.
So does the budget Amazon Basics 8-Sheet, which runs just 3 minutes but only ever sees small piles.
When to insist on 60 minutes
Choose 60 minutes when the shredder runs every workday or clears large batches. Five models here meet that bar, including the Bonsen 300-Sheet.
The 60-minute figure applies to auto mode, so check the manual run time too if you feed cards and staples often.
Manual slot or auto tray: which do you need?
You need both for most offices, because the auto tray takes plain paper and the manual slot takes the rest. Staples, clips and cards usually go through the manual slot.
Auto trays are built for flat stacks, so a fastener in the tray risks a jam.
Some cross-cut models accept staples in the tray, such as the Amazon Basics 200-Sheet. Check your pile: if it's mostly stapled packets, favor a model that takes them in the tray.
Otherwise plan on a quick staple pull before each load.
If you shred credit cards, the manual slot is essential. Most units here handle cards there, and the Aurora AU110MB names it as a feature.
A few models warn against metallic cards specifically, so check the card before it goes in.
Which auto feed shredder fits a small space?
The smallest models here are the ones built for a desk corner, and the Fellowes AutoMax 100MA is the most compact auto-feed unit thanks to its retractable tray. The Aurora AU110MB comes close at 17.4 pounds.
Both fit beside a desk without dominating the room.
Space also means bin size. A 4-gallon bin is easier to tuck under a desk but fills faster, so lighter users gain from it.
If you empty once a week, the smaller bin is no burden at all.
Weight matters too, since a compact machine that has to be lifted out of the way should stay light. The Fellowes and the Aurora AU110MB are the two to shortlist for a shared desk.
If you'd rather give up the auto tray than the floor space, a small paper shredder for home is the better route. It shreds less per pass but takes up less room.
For Aurora fans, our roundup of the best Aurora paper shredders covers the rest of that range.
Verdict: the best auto feed paper shredder for hands-off shredding
The BONSEN P-5 High Security 320-Sheet is the best auto feed paper shredder overall, because it pairs the largest tray here with P-5 security and a 60-minute run. If you shred sensitive records in bulk, it ends the search.
For everyday office paper, the Bonsaii 200-Sheet is the practical pick, with a big bin and a full-hour run at P-4. Choose the Amazon Basics 200-Sheet when you want the largest bin and a cross-cut that takes staples.
The Fellowes AutoMax 100MA suits a tight desk, and the Aurora AU110MB suits a home office that shreds a steady but modest pile. Budget buyers can start with the Amazon Basics 8-Sheet once their daily stacks stay small.
Pick the highest security your documents demand, then the tray size that matches how much paper you let pile up. That pair decides the rest.
Our top 3 picks at a glance
-
1
-
2
Best for small officesBonsaii 120-Sheet Auto-Feed Micro-Cut Shredder
8.6/10 our score
See it on Amazon -
3
Best for all-day office useBonsaii 200-Sheet Auto-Feed Micro-Cut Shredder
8.2/10 our score
See it on Amazon
Frequently asked questions
How many sheets should an auto feed paper shredder take at once?
Most home office models here take 100 to 200 sheets in the auto tray. Larger units reach 300 to 320 sheets, which suits clearing a filing cabinet.
Is P-5 security worth paying more for?
Yes if you shred legal, financial or medical records that carry personal data. P-5 micro-cut cuts paper into far smaller pieces than the P-4 models here, so reconstruction is much harder.
Do auto feed shredders take staples in the tray?
Most of the time, no. The auto tray is usually for plain paper, while staples, clips and cards go through the manual slot.
Some cross-cut models, like the Amazon Basics 200-Sheet, accept staples in the tray.
How often does an auto feed shredder need oiling?
Oil the cutters after every few large batches, or monthly in steady office use. The Bonsaii 200-Sheet model includes 12 lubricant sheets so you can run one through without buying oil separately.
Can I move an auto feed shredder around the office?
The larger models here have 360-degree casters, so you can roll them between desks. The heaviest picks weigh about 38 pounds, so plan a spot that doesn't need frequent lifting.
About this guide: Our look at best auto feed paper shredders draws on maker specs, materials and what owners report. See how we research.



